| Items |
 UT2024-006 UT/ET Series Common Mode Inductors |
UT2024-007 UT/ET Series Common Mode Inductors |
UT2024-008 UT/ET Series Common Mode Inductors |
UT2024-009 UT/ET Series Common Mode Inductors |
UT2024-010 UT/ET Series Common Mode Inductors |
|||||
| Description | Common-mode choke coils are useful in a wide range of applications for the prevention of electromagnetic interference (EMI) and radio frequency interference (RFI) from power supply lines and for prevention of malfunctioning of various electronic equipment. Features include low leakage flux, high self-resonant frequency, high impedance at applicable frequency and low stray capacitance in section winding. | |||||||||
| Click here to check stock >> | ||||||||||
| Configuration Type | Vertical | |||||||||
| Min. Inductance | 9.00 mH | 4.50 mH | 2.50 mH | 1.10 mH | 0.45 mH | |||||
| Max. Inductance Difference | 300 µH | 250 µH | 200 µH | 150 µH | 100 µH | |||||
| Max. DCR | 1.4 Ohm | 0.75 Ohm | 0.4 Ohm | 0.25 Ohm | 0.13 Ohm | |||||
| Current Rating | 0.50 A | 0.6 A | 0.7 A | 0.9 A | 1.00 A | |||||
| Width (W) | 23 mm | |||||||||
| Max. Width (W) | ||||||||||
| Length (L) | 18.5 mm | |||||||||
| Max. Length (L) | ||||||||||
| Height (H) | 23.5 mm | |||||||||
| Max. Height (H) | ||||||||||
| Pin Mounting (A) | 13.0 mm | |||||||||
| Nominal Pin Mounting (A) | ||||||||||
| Pin Mounting (B) | 10.0 mm | |||||||||
| Nominal Pin Mounting (B) | ||||||||||
| Weight | 0.52 oz | |||||||||
| Rated Voltage (AC) | 250 V | |||||||||
| Max. Temperature Rise | 45 ºC | |||||||||
| Min. Insulation Resistance | 100 mOhm | |||||||||
| Operating Temperature Range | -20 to 105 ºC | |||||||||
| Dielectric Withstanding Voltage (AC) | 2,000 V | |||||||||
| Industry Standards | CSA IEC UL | |||||||||
| Technical Notes |
|
|||||||||
| Features |
Low Leakage Flux High Self-Resonant Frequency High Impedance at Applicable Frequency Low Stray Capacitance in Section Winding |
|||||||||
|
|
||||||||||
