The Triad Split Pack™ split bobbin transformer is an extremely versatile tool for PC board applications. Split Pack™ transformers are nonconcentrically wound - with primaries and secondaries side-by-side. Unlike the secondary-on-top-of-primary designs of standard PC board transformers, the split bobbin winding and low capacitive coupling eliminate costly electrostatic shielding. It is offered in a dual secondary configuration with either single or dual primaries.
Unit of Measure

Check Stock

Click here to check stock >>

Specifications

Number of Pins

 6

Electrical Rating

 36.0 V·A

Secondary Voltage in Series

 10.0 V CT at 3.6 A

Transformer Contact Type

 Center Tap

Secondary Voltage in Parallel

 5.0 V at 7.2 A

Height (H)

 1.634 in

Width (W)

 2.205 in

Length (L)

 2.638 in

Mounting Width

 1.75 in

Mounting Length

 2.188 in

Dimension (A)

 0.416 in

Dimension (B)

 0.416 in

Dimension (C)

 1.870 in

Dimension (D)

 0.041 in

Dimension (E)

 0.020 in

Dimension (F)

 0.236 in

Primary Voltage

 115 V230 V

Primary Frequency

 50 Hz60 Hz

Type

 Single Primary

Weight

 1.10 lb

Technical Notes

N/A

  1. Hi-pot tested at 4,250 VRMS.
  2. PC terminal pin spacing for accurate placement.
  3. 115 V connect primary in parallel.
    230 V connect primary in series.
  4. Series Connections:
    Primary - Input 1 & 4
      Connect 2 & 3
    Secondary - Input 5 & 8
      Connect 6 & 7
  5. Parallel Connections:
    Primary - Input 1 & 2
      Connect 1 & 3. 2 & 4
    Secondary - Input 5 & 8
      Connect 5 & 7, 6 & 8
  6. For single primary, omit pins 2 and 3.
  7. 1.1 & 2.5 VA are not offered with mounting holes.