Request Information
Triad gate drive transformers are used universally in all high frequency switching topologies to isolate the control circuitry from the line-connected switches. The windings are interleaved for the lowest possible practical leakage inductance. Turn ratios of 1:1 and 1:1.5 optimize coupling and enhance performance. Available with single or dual secondaries, these transformers constructed of UL rated 130 ºC materials are easily standardized at operating frequencies 200 kHz and beyond.
Unit of Measure

Check Stock

Click here to check stock >>

 N/A

Specifications

Max. DCR 1-2

 N/A 0.350 Ohm

Max. DCR Gate

 N/A 0.875 Ohm

Min. ET Product

 N/A 540 VµSEC

Max. Leakage

 N/A 3.5 µH

Min. Inductance

 N/A 0.680 mH

Dimension (H)

 N/A 1.20 in

Dimension (W)

 N/A 1.04 in

Dimension (L)

 N/A 1.10 in

Dimension (A)

 N/A 0.150 in

Dimension (B)

 N/A 0.700 in

Dimension (C)

 N/A 0.600 in

Dimension (D)

 N/A 0.450 in

Dimension (E)

 N/A 0.850 in

Operating Frequency

 N/A 200 kHz and beyond kHz

Weight

 N/A 0.045 oz

Industry Standards

 N/A UL

Overall Turn Ratio

 N/A 1:1.5

Technical Notes

N/A

  1. Plug-in terminals are precision spaced to provide fixed mounting centers.
  2. Red Spec transformers are hi-pot tested at 1,000 VRMS.
  3. 150 VDC working voltage.
  4. Red Spec transformers feature small footprint base dimensions of 0.310 by 0.410 inch.
  5. Pin diameter = 0.020 inch.

Note

N/A A GDE25 KIT is available which includes one of each of the above listed components.

SnapMagic

N/A