Data/Voice Coupling Transformers
Audio Transformers
Triad telecommunications transformers are designed to meet the requirements for access over leased private lines or through the dial-up switched telephone network. The TY series transformers are used for a variety of applications including impedance matching, isolation, repeat coil, line balancing, bridging, and hybrid circuits.
Designed to meet FCC Part 68.
Designed to meet FCC Part 68.
Unit of Measure
| Items |
/Asset/a1243.jpg TY-305P Data/Voice Coupling Transformer |
/Asset/a1243.jpg TY-306P Data/Voice Coupling Transformer |
/Asset/a1244.jpg TY-307P Data/Voice Coupling Transformer |
/Asset/a1246.jpg TY-310P Data/Voice Coupling Transformer |
/Asset/a1245.jpg TY-311P Data/Voice Coupling Transformer |
|||||
| Click here to check stock >> | N/A | N/A | N/A | N/A | N/A | |||||
| Power Level | N/A | |||||||||
| Min. Longitudinal Balance1 | N/A 45 dB60 dB | |||||||||
| Longitudinal Balance Frequency2 | N/A 1000 to 4000 Hz at 45 dB 200 to 1000 Hz at 60 dB | |||||||||
| Dielectric Strength (FCC 68.304) | N/A 1500 V | |||||||||
| Maximum Input Level | N/A 5 mW | |||||||||
| Frequency Range (Data/Voice) | N/A 300 to 3500 Hz | |||||||||
| Frequency Range (Data) | N/A 800 to 3500 Hz | |||||||||
| Primary Impedance | N/A 600 Ohm | N/A 150 Ohm600 Ohm | N/A 600 Ohm | N/A 600 Ohm | N/A 600 Ohm | |||||
| Secondary Impedance | N/A 600 Ohm | |||||||||
| Max. DC Current | N/A 100 mA | N/A 75 mA | N/A | N/A | N/A | |||||
| Typical Insertion Loss | N/A 1.5 dB | N/A 1.5 dB | N/A 1.0 dB | N/A 1.0 dB | N/A 1.0 dB | |||||
| Typical Return Loss | N/A 10 dB | N/A 10 dB | N/A 26 dB | N/A 26 dB | N/A 26 dB | |||||
| Typical Frequency Response | N/A ±0.5 dB | |||||||||
| Trans-Hybrid Loss | N/A | |||||||||
| Schematic |
N/A
![]() Schematic 1 |
N/A
![]() Schematic 2 |
N/A
![]() Schematic 3 |
N/A
![]() Schematic 3 |
N/A
![]() Schematic 4 |
|||||
| Transformer Contact Type | N/A | N/A Split | N/A | N/A | N/A Center Tap | |||||
| Industry Standards | N/A FCC 68.304 for Dielectric Strength FCC 68.310 for Longitudinal Balance | |||||||||
| Applications | N/A Bridging Circuits Hybrid Circuits Impedance Matching Isolation Line Balancing Repeat Coil | |||||||||
| Technical Notes |
N/A
|
|||||||||
| Primary Matching Impedance | N/A | |||||||||
| Secondary Matching Impedance | N/A | |||||||||
| Max. Primary Unbalanced DC Current | N/A | |||||||||
| DC Resistance (Primary) | N/A | |||||||||
| DC Resistance (Secondary) | N/A | |||||||||
| Overall Turn Ratio | N/A | |||||||||
| Operating Temperature | N/A | |||||||||
| Storage Temperature | N/A | |||||||||
| Frequency Response Range | N/A | |||||||||
| Pri-Sec Hipot Test (Pri-Sec) | N/A | |||||||||
| Construction | N/A | |||||||||
| RoHS Compliance | N/A | |||||||||
| Note | N/A | |||||||||
|
||||||||||








