Triad Magnetics
Triad Magnetics
460 Harley Knox Blvd
Perris, CA 92571
Tel: 951.277.0757
Fax: 951.277.2757
Email: info@triadmagnetics.com
Website: www.triadmagnetics.com
Print Back
Triad prepackaged wall plug-in power supplies decrease product design time. These plug-in power sources eliminate the need for internal power supply cooling devices, thereby reducing the noise level, size and weight of the end product. In addition, these compact power sources keep heat away from sensitive circuits, and supply a safer lower output to the end product. Wall plug-in sources are completely enclosed to prevent tampering. They are offered in a wide range of popular voltages, power levels and reversed polarity (-R). They output voltage is regulated; which means the output voltage will not vary much with load. Models are available with generous six foot cord lengths. Available in 50-60 Hz operating frequency. Level IV and V efficiency. Meets EIAS 2007 energy efficiency requirements for external power supplies
Unit of Measure

Check Stock

Click here to check stock >>

 N/A

Specifications

Polarity Center

 N/A Negative

Input Voltage (AC)

 N/A 100 to 240 V

Output Voltage (DC)

 N/A 5.9 V

Output Current (DC)

 N/A 2.5 A

Input Operating Frequency

 N/A 50 Hz60 Hz

2007 EISA Efficiency

 N/A VI

Output Plug Dimensions

Length (L)

 N/A 0.433±0.020 in11 mm

Inside Diameter (ID)

 N/A 0.083±0.004 in2.1 mm

Outside Diameter (OD)

 N/A 0.217±0.004 in5.5 mm

Electrical Specifications at 25 Degree Celsius (ºC) Temperature

Alternating Current (AC) Input Voltage Range

 N/A 90 to 264 V

Input Current at 115 VAC (Root Mean Square (RMS))

 N/A <0.5 A

Maximum Peak Inrush Current at 115 VAC (Cold Start)

 N/A <80 A

Load Regulation

 N/A ±5 %

Line Regulation

 N/A ±5 %

Maximum Ripple and Noise (pk-pk)

 N/A 150 mV

No-Load Power (Stand By)

 N/A <100 mW

Average Efficiency

 N/A ≥82.39 %

Note for Average Efficiency

 N/A Meets minimum level VI efficiency.

Environmental Specifications

Operating Temperature Range

 N/A 0 to 40 ºC

Storage Temperature

 N/A -20 to 60 ºC

Non-Condensing Humidity

 N/A 5 to 95 %

Reliability Specifications

Leakage Current at 264 VAC

 N/A <0.25 mA

Maximum Dielectric Strength (Hi-Pot)

 N/A 5 mA

Direct Current (DC) Dielectric Strength (Hi-pot) Per 3 Second (sec) Time

 N/A 4242 V

Warranty

 N/A 5 years

Mechanical Parameters

Case Type

 N/A Thermoplastic Molded Enclosure

Long Nominal Output Cord Length

 N/A 5 ft18 AWG

Safety and EMI

Safety and EMI

 N/A UL: 62368-1 Class II, Double Insulated
UL File Number: E345519
EMI standard: FCC part15 Subpart B, ICES-003 Issue 6, ANSI C63.4 2014
Over voltage and short circuit protected

EISA 2007/CEC Compliance

EISA 2007/CEC Compliance

 N/A All WSU Power Supplies manufactured after February 10, 2016 will meet the minimum efficiency levels for direct operation as defined by DOE Docket Number EERE 2008-BT-STD-0005-0219. Triad’s level VI products will have date code no later than 1605 (YYWW) where 16 is the year and 05 is the 5th week of 2016. In accordance with DOE requirement the label will also contain the Roman numeral VI with a circle.

RoHS Compliance

RoHS Compliance

 N/A As of manufacturing date February 2016, all standard products meet the requirements of 2015/863/EU, known as the RoHS 3 initiative. Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version.