Triad Magnetics
Triad Magnetics
460 Harley Knox Blvd
Perris, CA 92571
Tel: 951.277.0757
Fax: 951.277.2757
Email: info@triadmagnetics.com
Website: www.triadmagnetics.com
Print Back
Triad isolation transformers are power transformers for isolating equipment from direct connection to the power line. They are offered in a variety of voltages and case types. Triad isolation transformers are also offered in hospital type (designed with an MD suffix) which are designed and constructed to meet the low leakage current requirements for today’s medical equipment. The transformers are constructed with nonconcentrically wound coils. The primary and secondary are wound on separate arbors, then assembled on a laminate core side-by-side separated by insulation. This prevents electrical connection, under normal or overload conditions, between the primary and secondary windings. These hospital type units are offered with a resettable circuit breaker, providing protection from overload and short circuit conditions.
Unit of Measure

Check Stock

Click here to check stock >>

 N/A

Specifications

Output Wattage (VA) Rating

 N/A 1,000 W

Primary Voltage

 N/A 115 V

Primary Frequency

 N/A 50 Hz60 Hz

Secondary Voltage (±5%)

 N/A 115 V

Secondary Current

 N/A 8.700 A

Case Type

 N/A M

Connections

 N/A 6' Cord, Plug & Socket

Height (H)

 N/A 5 5/16 in

Width (W)

 N/A 4 1/2 in

Depth (D)

 N/A 7 1/8 in

Mounting Width

 N/A 3 1/2 in

Mounting Depth

 N/A 6 in

Mounting Hole Size

 N/A 1/2 x 1/4 in

Weight

 N/A 31.00 lb

Technical Notes

Technical Notes

 N/A
  1. Line cord, plug and receptacle are U.L. listed and verified to meet federal specifications.
  2. Connections are by leads, plugs and sockets.
  3. Hi-pot tested at 1,500 VRMS.

Note

Note

 N/A With ground wire

SnapMagic

N/A