Item # AEU65-120, 11.4 to 12.6 Volt (V) Adjustable Output Voltage Range AEU 65 Series Switch Mode Power Supply On Triad Magnetics

Triad Magnetics
460 Harley Knox Blvd
Perris, CA 92571
Tel: 951.277.0757
Fax: 951.277.2757
Email: info@triadmagnetics.com
Website: www.triadmagnetics.com

Print Back

The AEU65-120 is a single output power supply. This power supply is designed for a wide variety applications where high reliability is desired, including applications for the industrial and telecommunications markets. Excellent performance specifications are provided, together with compliance to European EMC (EN55022, Class B and EN61000-3-2), and Low Voltage directive.

Unit of Measure

Check Stock | Input Characteristics (at 25 ºC) | Output Characteristics (at 25 ºC) | General Specifications (at 25 ºC) | Environmental Specifications (at 25 ºC) | EMC and Safety Specifications (at 25 ºC) | Specifications | Note | SnapMagic

Check Stock

Click here to check stock >>

Input Characteristics (at 25 ºC)

Alternating Current (AC) Input Voltage	N/A 90 to 264 V
Direct Current (DC) Input Voltage	N/A 127 to 373 V
Input Frequency Range	N/A 47 to 63 Hz
Input Current at 115 VAC (Root Mean Square (RMS))	N/A 1.6 A
Input Current at Typical 230 VAC	N/A 0.8 A
Maximum Inrush Current at 115 VAC for Cold Start	N/A 30 A
Maximum Inrush Current at 230 VAC for Cold Start	N/A 60 A
Leakage Current at 240 VAC	N/A < 2.4 mA

Output Characteristics (at 25 ºC)

Direct Current (DC) Output Voltage	N/A 12 V
Direct Current (DC) Voltage Tolerance	N/A ±1.5 %
Output Current (Convection)	N/A 0 to 5.42 A
Output Power (Convection)	N/A 65 W
Adjustable Output Voltage Range¹	N/A 11.4 to 12.6 V
Ripple and Noise Voltage at Peak to Peak²	N/A 120 mV
Load Regulation	N/A ±0.5 %
Line Regulation	N/A ±0.5 %
Efficiency	N/A 87.0 %
Start-Up Time at 230 VAC for Full Load	N/A 1000 ms
Start-Up Time at 115 VAC for Full Load	N/A 2000 ms
Rise-Up Time at 230 VAC for Full Load	N/A 30 ms
Rise-Up Time at 115 VAC for Full Load	N/A 30 ms
Hold-Up Time at 230 VAC for Full Load	N/A 24 ms
Hold-Up Time at 115 VAC for Full Load	N/A 12 ms
Overcurrent Protection³	N/A 110 to 160 %
Direct Current (DC) Over Voltage Protection	N/A 13.8 to 16.2 V
Output Type	N/A Constant Voltage

General Specifications (at 25 ºC)

Length	N/A 110 mm4.3 in
Width	N/A 78 mm3.1 in
Height	N/A 35.0 mm1.38 in
Weight	N/A 200 g
Cooling	N/A Natural Convection
Isolation Resistance at 500 VDC (Input (I/P) - Output (O/P))	N/A 100 MO
Isolation Resistance at 500 VDC (Input (I/P) - Floating Gate (FG))	N/A 100 MO
Isolation Resistance at 500 VDC (Output (O/P) - Floating Gate (FG))	N/A 100 MO
Direct Current (DC) Dielectric Strength (Input (I/P) - Output (O/P))	N/A 4.3 kV
Alternating Current (AC) Dielectric Strength (Input (I/P) - Floating Gate (FG))	N/A 1.5 kV
Alternating Current (AC) Dielectric Strength (Output (O/P) to Floating Gate (FG))	N/A 0.5 kV
Warranty	N/A 3 years
Minimum Mean Time Between Failure (MTBF) per MIL-HDBK-217F (25 ºC)	N/A 250 K hr

Environmental Specifications (at 25 ºC)

Operating Temperature at Full Load⁴	N/A -20 to 50 ºC
Non-Condensing Relative Operating Humidity	N/A 20 to 90 %
Storage Temperature	N/A -40 to 85 ºC
Non-Condensing Relative Storage Humidity	N/A 10 to 95 %
Temperature Drift (0 to 50 ºC)	N/A < 0.03 %/ºC
Vibration	N/A 10 to 500 Hz, 2G 10 min/cycle, period of 60 min, each X, Y & Z axis

EMC and Safety Specifications (at 25 ºC)

EMI Emissions	N/A Compliance to EN55022, CISPR22 Class B (Conducted & Radiated)
Harmonic Current	N/A Compliance to EN61000-3-2, 3
EMS Immunity	N/A Compliance to EN61000-4-2, 3-6, 8 & 11; EN55024 heavy, light industry level, criteria A
Safety Approval	N/A UL 60950-1, (Insulation Class -1)
Note for EMC and Safety Specifications at 25 ºC	N/A The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Specifications

RoHS Compliance	N/A As of manufacturing date February 2016, all standard products meet the requirements of 2015/863/EU.
Industry Standards	N/A CB CE MIL-HDBK-217F RoHS TUV UL

Note

Note

All I/O connection shall Follow specified Model Label.
Maximum Temperature at Full Load 50ºC

¹ Output voltage can be adjusted at VR51.
² Ripple and noise are measured at 20 MHz of bandwidth by using a 12 Inch (in) twisted-pair wire termination with a 0.1 µF and 47 µF parallel capacitors.
³ Hiccup mode. Resets automatically once the fault condition is removed.
⁴ Refer to output load derating curve