The Triad Magnetics team constantly seeks new ways to improve on transformer technology. One such improved technology is our Triad Split Pack™ transformers.
Split Pack™ transformers are a versatile tool for an array of PC board applications. Unlike standard PC board transformers configured with secondary-on-top-of-primary designs, the Split Pack™ is a split bobbin side-by-side transformer, a small innovation that leads to large benefits.
Their split bobbin winding and low capacitive coupling eliminates the need for electrostatic shielding, a costly PC component. Their independent secondaries allow for use in series, parallel, or separate circuits. Primary-to-secondary high potential (hipot) dielectric strength is 4200 volts AC (VAC), nearly twice the industry standard — secondary-to-secondary dielectric strength is also increased.
These represent only a small sampling of the benefits of Triad Split Pack™ transformers. For more information — including about enhanced safety features, performance capabilities, and more — watch the video at right or contact us today.
| Items |
 F10-110-C2 PC Mount Split Pack™ Class 2/3 Power Transformers |
F12-090-C2 PC Mount Split Pack™ Class 2/3 Power Transformers |
F16-070-C2 PC Mount Split Pack™ Class 2/3 Power Transformers |
F20-055-C2 PC Mount Split Pack™ Class 2/3 Power Transformers |
F24-045-C2 PC Mount Split Pack™ Class 2/3 Power Transformers |
|||||
| Description | The Triad Split Pack™ split bobbin transformer is an extremely versatile tool for PC board applications. Split Pack™ transformers are nonconcentrically wound - with primaries and secondaries side-by-side. Unlike the secondary-on-top-of-primary designs of standard PC board transformers, the split bobbin winding and low capacitive coupling eliminate costly electrostatic shielding. It is offered in a dual secondary configuration with either single or dual primaries. | |||||||||
| Click here to check stock >> | ||||||||||
| Number of Pins | 6 | |||||||||
| Electrical Rating | 1.1 V·A | |||||||||
| Secondary Voltage in Series | 10.0 V CT at 0.11 A | 12.6 V CT at 0.09 A | 16.0 V CT at 0.07 A | 20.0 V CT at 0.055 A | 24.0 V CT at 0.045 A | |||||
| Transformer Contact Type | Center Tap | |||||||||
| Secondary Voltage in Parallel | 5.0 V at 0.22 A | 6.3 V at 0.18 A | 8.0 V at 0.14 A | 10.0 V at 0.11 A | 12.0 V at 0.09 A | |||||
| Height (H) | 1.130 in | |||||||||
| Width (W) | 1.142 in | |||||||||
| Length (L) | 1.417 in | |||||||||
| Mounting Width | ||||||||||
| Mounting Length | ||||||||||
| Dimension (A) | 0.265 in | |||||||||
| Dimension (B) | 0.265 in | |||||||||
| Dimension (C) | 1.200 in | |||||||||
| Dimension (D) | 0.041 in | |||||||||
| Dimension (E) | 0.020 in | |||||||||
| Dimension (F) | 0.236 in | |||||||||
| Primary Voltage | 115 V230 V | |||||||||
| Primary Frequency | 50 Hz60 Hz | |||||||||
| Type | Single Primary | |||||||||
| Weight | 0.17 lb | |||||||||
| Nominal Secondary Voltage | 5 V10 V | 6.3 V12.6 V | 8 V16 V | 10 V20 V | 12 V24 V | |||||
| Secondary Voltage-Series Connection | ||||||||||
| Secondary Voltage-Parallel Connection | ||||||||||
| Technical Notes |
|
|||||||||
| Note | ||||||||||
|
|
||||||||||
