Triad Magnetics has been an industry leading transformer manufacturer for over 70 years. Among our extensive selection of high-powered, highly reliable, and compact transformers is our line of more than 50 PC Mount Flat Pack™ power transformers.
Designed to meet the low clearance space requirements of PC board and solid state power designs, as well as for control and instrumentation applications, our Flat Pack™ transformers feature mounting widths that range from 1.26 in to as small as 0.88 in, and mounting lengths from 2.52 in to as short as 1.62 in. Card spacing ranges from ¾ in to 1 ½ in, allowing for electrical ratings between 2.5 VA and 48 VA.
Available in a dual primary and dual secondary configuration, which allows for both in series and parallel linking, PC Mount Flat Pack™ power transformers are designed to operate at the voltage and current levels most commonly used in electronics power applications.
The specification table below has information for all PC Mount Flack Pack™ power transformers, and you can contact Triad Magnetics at any time to discuss your application and requirements in detail.
| Items |
 FP10-250 PC Mount Flat Pack™ Power Transformers |
FP12-200 PC Mount Flat Pack™ Power Transformers |
FP16-150 PC Mount Flat Pack™ Power Transformers |
FP20-125 PC Mount Flat Pack™ Power Transformers |
FP24-100 PC Mount Flat Pack™ Power Transformers |
|||||
| Description | The FP10-250 is part of a series which has a long history of reliable service in the field, made from a proven design and constructed with UL recognized materials. | The FP12-200 is part of a series which has a long history of reliable service in the field, made from a proven design and constructed with UL recognized materials. | The FP16-150 is part of a series which has a long history of reliable service in the field, made from a proven design and constructed with UL recognized materials. | The FP20-125 is part of a series which has a long history of reliable service in the field, made from a proven design and constructed with UL recognized materials. | The FP24-100 is part of a series which has a long history of reliable service in the field, made from a proven design and constructed with UL recognized materials. | |||||
| Click here to check stock >> | ||||||||||
| Electrical Rating | 2.5 V·A | |||||||||
| Voltage in Series | 10.0 V CT at 0.25 A | 12.6 V CT at 0.2 A | 16.0 V CT at 0.15 A | 20.0 V CT at 0.125 A | 24.0 V CT at 0.1 A | |||||
| Transformer Contact Type | Center Tap | |||||||||
| Voltage in Parallel | 5.0 V at 0.5 A | 6.3 V at 0.4 A | 8.0 V at 0.3 A | 10.0 V at 0.25 A | 12.0 V at 0.2 A | |||||
| Dimension (A) | 1.875 in | |||||||||
| Dimension (B) | 1.562 in | |||||||||
| Dimension (C) | 0.650 in | |||||||||
| Dimension (D) | 0.267 in | |||||||||
| Dimension (E) | 0.375 in | |||||||||
| Dimension (F) | 1.600 in | |||||||||
| Dimension (G) | ||||||||||
| Dimension (H) | 0.650 in | |||||||||
| Dimension (L) | 1.875 in | |||||||||
| Dimension (W) | 1.562 in | |||||||||
| Weight | 5.0 oz | |||||||||
| Pin Dimension | 0.020 x 0.041 in | |||||||||
| Mounting Width | 0.88 in | |||||||||
| Mounting Length | 1.62 in | |||||||||
| Primary Voltage | 115 V230 V | |||||||||
| Primary Frequency | 50 Hz60 Hz | |||||||||
| RMS Hi Pot Tested | 2,000 V | |||||||||
| Construction | Wound on two dual channel nylon bobbin. Materials are UL recognized, Class B (130º C) rated. | |||||||||
| Safety | These products are 100% tested for dielectric strength at 2 KVAC, 60 Hz between primary and secondary windings and between the primary/secondary windings and the core. | |||||||||
| Agency File |
UL: File E53148, UL 506, Class B General Purpose Transformer, cUL: File E53148, UL 506, Class B General Purpose Transformer, Canadian Use |
|||||||||
| RoHS Compliance | As of manufacturing date February 2016, all standard products meet the requirements of 2015/863/EU, known as the RoHS 3 initiative. | |||||||||
| Technical Notes |
|
|||||||||
| Nominal Secondary Voltage | 5 V10 V | 6.3 V12.6 V | 8 V16 V | 10 V20 V | 12 V24 V | |||||
| Secondary Voltage-Series Connection | ||||||||||
| Secondary Voltage-Parallel Connection | ||||||||||
|
|
||||||||||
