Unit of Measure
Specifications
Secondary Voltage |
N/A 18.0 V |
Transformer Contact Type |
N/A Center Tap |
Secondary Current |
N/A 4.000 A |
Primary Voltage |
N/A 115 V |
Primary Frequency |
N/A 60 Hz |
Secondary RMS Test Voltage |
N/A 1,500 V |
Case Type |
N/A U |
Connections |
N/A Lugs |
Height (H) |
N/A 3 1/2 in |
Width (W) |
N/A 4 1/8 in |
Depth (D) |
N/A 3 1/4 in |
Mounting Width |
N/A 3 7/16 in |
Mounting Depth |
N/A 2 1/4 in |
Mounting Hole Size |
N/A 13/64 x 3/8 in |
Weight |
N/A 5.20 lb |
Note
Note |
N/A Windings may be connected in series to obtain their combined voltage when properly phased. Current will be equal to the current of the lowest winding. Example: Two 6.3 V windings @ 2 A in series would be 12.6 V @ 2 A. Windings may also be connected in parallel to obtain combined current. Example: Two 6.3 V windings @ 2 A in parallel would be 6.3 V @ 4 A. |
